MSRP: $139.00 USD | Product # 8002000 | Buy Online
This mid-level rack features simple no-tool installation and an ergonomic skewer that you can adjust with just one hand. Which comes in awful handy if you like to hold a bugle in the other hand and play “Charge!” while you’re loading your bike.
MSRP: $139.00 USD | Product # 8002000 | Buy Online
This mid-level rack features simple no-tool installation and an ergonomic skewer that you can adjust with just one hand. Which comes in awful handy if you like to hold a bugle in the other hand and play “Charge!” while you’re loading your bike.
Q: What Maintenance do I need to do?
A: Maintenance is important to keep it working properly and to help it last longer. Apply grease to nuts, screws, bolts, and especially the adjusting nut and lever of the locking skewer. Lubricate locks with graphite. Remove the rack when not in use. Clean the rack periodically, especially in marine environments and where road salt is used.
Q: What is the minimum / maximum distance I can have between my crossbars?
A: The viper will safely fit bar spreads from 16” to 42”, however spreads of 16” to 18” are limited to two bikes.
Q: How long is the tray?
A: 39.5"
Q: Does it carry all bikes?
A: The viper carries just about any bike with a quick release wheel skewer. However, there are a few exceptions where one of our other mounts should be used instead. These exceptions include, but are not limited to, bikes with triple clamp forks and forks with dropout spacing (the distance between the forks at the tips) other than 100mm.
Q: How many can I carry?
A: That depends on the bikes and vehicle. First check the Fit List to see if there are any specific limitations for your vehicle (using the online Fit List bike mounts may not be offered or a load limit will be stated in the notes at the end of the process). In general, you will need about 12 inches of crossbar per bike when mounting them alternately front and rear facing. Barring any other restriction the practical limit is usually 4 bikes.
Q: Can I use this bike mount with a factory rack?
A: Fork style mounts will not mount directly to factory crossbars. The bike mount gets its side to side stability from the crossbar. Fork mounts stress crossbars more than upright styles because of their narrowness. Through testing we have found that factory rack crossbars are not strong enough to handle the stress generated by fork mounts.
Q: Can I get the viper with a short wheeltray?
A: No. The long wheel tray is a feature that makes the viper adaptable to vehicles with short rooflines. The long tray is also an integrated part of the design ( it wouldn’t work without it). If your vehicle has enough crossbar spread, the Boa is a less expensive, short tray alternative.
Q: Why would I go with a fork mount over a “upright” style mount, or vise versa?
A: Some like the aerodynamic look and manageability of a fork mount. Some don’t want to hassle with removing the bike’s front wheel and prefer an upright rack. A bike may have unique features (lefty or triple clamp forks, etc.) that limit bike mount choices, but one or more of our mounts will do the trick to keep your bike secure. Look up the specific bike mount for more details.
Q: I need to carry several bikes. Can I place bikes on the car backwards to get more space?
A: Yes, just remember to turn the bike around before riding it.
MSRP: $139.00 USD
Product#: 8002000
Top of the line locking fork mount. Single and dual piston disc brake compatible. Mounts to round and rectangular bars.
Produced: 2001-2009
History: No changes since introduction
General Information:
Weight: 6-1/2 lbs.
Dimensions: 47” long x 7-3/4” wide at skewer, 2-3/4” wide at wheel tray.
Capacity: 1 bike
 
We are commited to minimizing our impact on the environment.
Click here to learn more »
|
8820112
RPL, RATTLER STRAP
| 
8820117
RPL, WHEELTRAY ENDCAP
| 
8820147
RPL, HDWR, VIPER
|
| 
8820148
RPL, ASSY, VIPER, SKEWER
| 
8820149
RPL, WHEELTRAY, VIPER, 39.5
| 
8820150
RPL, ASSY, VIPER, HEAD
|
|
 |
 
|
