MSRP: $175.00 USD | Product # 8002405 | Buy Online
Custer bit the dust at Little Bighorn. But even on a budget, your bikes will never bite the dust on a Yakima BigHorn. This affordable beauty is designed for families and occasional riders who want to keep the amount they spend proportionate to the number of times they’ll use their rack.
MSRP: $175.00 USD | Product # 8002405 | Buy Online
Custer bit the dust at Little Bighorn. But even on a budget, your bikes will never bite the dust on a Yakima BigHorn. This affordable beauty is designed for families and occasional riders who want to keep the amount they spend proportionate to the number of times they’ll use their rack.
Q: Will I be able to get in to the back of my vehicle with a BigHorn 4 installed?
A: The BigHorn 4 can be tilted down enough to allow most hatches or double gate doors to open fully. Bikes need to be removed first! To keep the bikes on and have enough clearance for asymmetrical doors and tailgates a “gate” style carrier should be used.
Q: What type of trailer hitch does it use?
A: This system requires a 2” receiver hitch, class II or greater. Only a Yakima 1” adapter can be used to fit to be a 1” hitch.
Q: Can I add more bikes?
A: No. Class II hitches can carry a maximum of 4 bikes.
Q: Can I use this product if I have a spare tire on the back of my vehicle?
A: Probably not. Receiver hitches and spare tires vary greatly, so only a test fit at a dealer will tell you for sure. As a very rough gauge (no promises) the BigHorn 4 has about 8 1/2” of clearance between the hitch-bolt hole and the inner side of the upright mast. If it looks like that’s enough clearance, try one on at your dealer. Use of a hitch extender is not recommended as it would increase leverage and lack anti-wobble features. Should you decide to use one anyway, be advised that stability and capacity will be reduced.
Q: Is there a weight limit?
A: Maximum load is 4 bikes/120 lbs.
Q: How much play is normal (when in the hitch)?
A: Hitches, like anything else, will have slight variations in dimensions and that’s a fact of life when anything is manufactured. The critical dimension for a hitch is the I.D. or Interior Dimension (the space inside the hitch). The critical dimension for a hitch product is the O.D. or Outside Dimension of the tongue. The team has designed the tongues of our new hitch racks to allow no play, but rarely, some hitches out there may have a slightly oversized I.D., causing slight play in the hitch. Have them tighten the hitch bolt completely to tighten it up and reduce play.
MSRP: $175.00 USD
Product#: 8002405
Entry-level 4-bike carrier mounts on 2-inch receiver hitches. Dual-arm design fits more bike types. Rack can be tilted down for access to the back of the vehicle. Features SwitchBlade anti-swing cradles. Compatible with DeadLock security system, and PowderHorn.
Produced: 2004 to present
History: No significant changes.
General Information:
Weight: 30 lbs.
Dimensions: About 41-½” high & 41” extension from hitch bolt hole. About 11-5/8” between back of mast and hitch bolt hole. Distance between arms is 11.5" (center to center).
Capacity: Class II hitch = 4 bikes up to 120 lbs, Class I hitch = 3 bikes up to 90 lbs.
 
We are commited to minimizing our impact on the environment.
Click here to learn more »
|
8002410
ADAPTER 1 1/4 TONGUE
| 
8002412
CHAINSTRAP
| 
8780017
RPL, HDWR BAG, BIG HORN,
|
| 
8780018
RPL, TONGUE & PIVOT HDWR
| 
8780019
RPL, ENDCAP 2.5, HITCH 04
| 
8780020
RPL, PIN WIRE LOCK,
|
| 
8780022
RPL, HITCH BOLT, NUT & PIN
| 
8780023
RPL, CRADLE SET-1 BIKE
| |
|
 |
 
Checking...
 Yakima hitch racks are designed to fit standard either 2" or 1 1/4" receiver hitches, Class II or greater. Several factors may prevent a hitch rack from being installed on your vehicle, including, but not limited to, hitch class (some brands of Class I hitch will not allow the rack tongue to be inserted fully), the hitch being a non-standard size, the vehicle having an external rear mounted spare tire, and the mounting location of the hitch itself. The best way to determine if one of our hitch racks will work for you is to visit your local Yakima dealer and try one out. To purchase this rack find a dealer near you.
This product does indeed fit your car. However, this product requires
that you have a 2" Hitch attached to your car. If you have a 1 1/4" Hitch,
your may try our Hitch Adaptor to see if it will work. Please make sure
you've got everything you need to create the gear-hauling system of your dreams.
This product does indeed fit your car. However, this product requires
that you have a 1 1/4" Hitch attached to your car. Please make sure you've
got everything you need to create the gear-hauling system of your dreams.
This product does indeed fit your car. However, this product requires
that you have a Hitch Ball attached to your car. Please make sure you've
got everything you need to create the gear-hauling system of your dreams.
 Dagnabbit, this rack doesn't work with your hitch receiver. You can use our Fit My Car online application to find other Yakima products that work with your vehicle. To talk with a real person feel free to contact your local dealer, or call our customer support line at 888-925-4621 from 7am-5pm Pacific Time M-F to learn more about your fit options. We’ll do our darnedest to get you on your way to the great outdoors in no time.
|
|
