Features:
  • Universal built-in hardware fits round, square, factory and aerodynamic crossbars right out of the box
  • Simple tool-free installation and removal of the bike mount from your roof rack
  • Lockable skewer keeps your bike safe and sound (SKS Lock Cores sold separately)
  • Easy-to-adjust sliding wheel tray fits a wide range of bike lengths (except tandems and recumbents)
  • Doesn’t touch the painted surfaces of your bike
  • Fits most disc brakes

Learn more about Product features and installation

Download Instructions Video Demonstration
specifications
  • Weight: 7.00 lbs.
  • Dimensions: L 53.50" X W 7.25" X H 2.50"
  • Capacity: 1
Product #8002098
FAQ:

Q: A: What Maintenance do I need to do?

Q: Maintenance is important to keep it working properly and to help it last longer. Apply grease to nuts, screws, bolts, and especially the adjusting nut and lever of the locking skewer. Lubricate locks with graphite. Remove the rack when not in use. Clean the rack periodically, especially in marine environments and where road salt is used. A: Does it carry all bikes?

Q: The ForkLIft carries just about any bike with a quick release wheel skewer. However, there are a few exceptions where one of our other mounts should be used instead. These exceptions include, but are not limited to, bikes with triple clamp forks and forks with dropout spacing (the distance between the forks at the tips) other than 100mm. A: How many can I carry?

Q: That depends on the bikes and vehicle. First check the Fit List to see if there are any specific limitations for your vehicle (using the online Fit List bike mounts may not be offered or a load limit will be states in the notes at the end of the process). In general, you will need about 12 inches of crossbar per bike when mounting them alternately front and rear facing. Barring any other restriction the practical limit is usually 4 bikes. A: Can I use this bike mount with a factory rack?

Q: Yes the ForkLift is designed to fit most all factory racks right out of the box. A: Why would I go with a fork mount over a “upright” style mount, or vise versa?

Q: Some like the aerodynamic look and manageability of a fork mount. Some don’t want to hassle with removing the bike’s front wheel and prefer an upright rack. A bike may have unique features (lefty or triple clamp forks, etc.) that limit bike mount choices, but one or more of our mounts will do the trick to keep your bike secure. Look up the specific bike mount for more details. A: I need to carry several bikes. Can I place bikes on the car backwards to get more space?

Q: Yes, just remember to turn the bike around before riding it. A: What if I want a longer wheelstrap for my ForkLift or FrontLoader?

accessories:
parts:

You can order replacement parts from your local Yakima dealer , or directly from us by calling our Consumer Sales Representatives at 888.925.4621.

Spare part for 9mm Tandem Mount

8002080

UNIVERSAL LOCKING SKEWER

Replacement rod for Sprocket Rocket skewer.

8880079

SPROCKETROCKET SKEWER ROD

Skewer for Sprocketrocket.  Also, compatible with Forklift and Sidewinder.  Includes one skewer.

8880080

SPROCKETROCKET SKEWER

Replacement Bottom Mount Bales for Aero / Universal Mounts. 2 bales Included.

8860053

AERO MOUNT BALES (1PR)

Replacement bolts for Aero / Universal Mounts.  Includes 2 bolts.

8860061

T BOLT1/4"X3"

Replacement rear wheel retainer assembly for ForkLift and FrontLoader bike racks.  Includes one carriage and one strap.

8880137

REAR WHEEL RETAINER ASSEMBLY

Replacement pad for the rear mount on ForkLift.  Includes one pad.

8880138

FORKLIFT REAR MOUNT TOP PAD

Front and Rear Adjusting Handles for Forklift bike carrier.  Includes 1 front handle and 1 rear handle.

8880139

FORKLIFT ADJUSTING HANDLES

End cap for aluminum ForkLift produced between 2008-09.

8880140

ALUMINUM FORKLIFT END CAP

Two Vinyl Caps for 1/4" T bolts. Used in ForkLift, SUPPup and KeelOver mounts.

8880141

VINYL CAP .207X.5 BLACK

End Cap for Forklift, Frontloader Trays.  Works with steel tubed trays (2009 forward).

8880188

ENDCAP STEEL TRAY FORKLIFT

Replacement Jaw for Forklift.  Includes 1 Jaw assembly.

8880189

FORKLIFT JAW

Replacement Rear Wheelstrap for Forklift, Frontloader

8880191

WHEELSTRAP FRONTLOADER, FORKLIFT

Bail Adapter for Forklift, Frontloader.  Assembly comes with knob, adapter and Tbolt.

8880196

BAIL ADAPTER

Replacement Clamp Assembly for Forklift, Frontloader bike mounts.

Includes Tray Mount, Top Pads, Bottom Aero Mount, Screw and Top Fastener.

8880208

REAR CLAMP ASSEMBLY FORKLIFT/ FRONTLOADER

Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.

8880229

HoldUp RPL Wheelstrap